Brolac Quick Dry PU Enamel

Product benefits:

1. Hi-gloss finish
2. Recommended as a top-coat for mild corrosive environment over suitable primers
3.  Excellent levelling and application properties

Coverage:

100-110* sq. ft. / litre for 1 coat finish under normal conditions *Actual coverage may vary due to factors such as method and condition of application, surface roughness and porosity and weather conditions.

How to prepare? (surface / wall):

1. Ensure that the surface is free from dirt, grease, rust and moisture.
2. Sand the surface using Emery Paper 180 to remove loosely bound particles, rust, peeling or flaking paint, etc.
3.  Wipe the surface clean.

How to apply?:

• PRIMING Ferrous Metal Surface: Apply 1-2 coats of J&N Superior Red Oxide Primer on the metal surface by thinning (If necessary). Allow drying for 8-10 hrs after each coat. Non-Ferrous Metal Surface: Apply 1-2 coats of J&N Zinc Primer Yellow on the metal surface, by thinning it with J&N GP Thinner, if necessary. Let it dry for 5-6 hrs.
• Wooden Surface: Apply first coat of Jensolin Pink/White Primer on the wooden surface by thinning with J&N GP thinner (if required). Let it dry for 8-10 hrs. Use suitable putty to fill minor cracks, dents or holes. After drying, use Emery Paper 180 to sand the surface. Apply another coat of J&N Pink/White Primer. Allow it to dry for 8-10 hrs.
• Masonry Surface: Apply first coat of Jensolin Pink/White Primer on the surface by thinning with J&N GP thinner (if necessary). Let it dry for 8-10 hrs.